Three Upcoming Automotive and Aerospace CFD Webinars in February

February is webinar month here at Cadence CFD and we’ve got a line-up of three events that cover applications from automotive to aerospace and technologies from geometry model prep and meshing to a multiphysics simulation environment.

See how the Omnis Automative Wizard automates the entire simulation process within a single environment. Learn how Pointwise’s Flashpoint automation suite can be coupled with the FlightStream CFD code for rapid aerodynamic simulations. And watch as Omnis AutoSeal and Hexpress take the drudgery out of geometry model prep and meshing.

If you need to reduce the turn around time for your CFD simulations or want to do more with the time you have available, these webinars are for you. Please join us.

Accelerate Innovation with the Omnis Automotive Wizard for CFD Simulations

Learn how the Cadence® OmnisTM Automotive Wizard enables full automation of the CFD process from pre- to post-processing while minimizing the amount of user interaction and input. The result is a reduction in time meaning either faster time to market or the ability to explore a larger design space.

The Omnis Automotive Wizard brings together in a single environment a broad range of applications including aerodynamics, aero-acoustics, thermal management, climate control, powertrain, rotating equipment, and water management.

When: Thu 10 Feb 2022

Time for EMEA and India: 10:00 GMT / 11:00 CET / 12:00 EET and Israel / 15:30 IST

Time for Americas: 9:00 am PST / 12:00 pm EST

Rapid Design Analysis Pairing Pointwise Meshing and FlightStream

Learn how the Cadence® Pointwise® Meshing software couples with the compressible-flow vorticity solver in FlightStream® from Research in Flight for rapid aerodynamic simulations.

Pointwise’s Flashpoint Automatic Surface Meshing automates the generation of surface meshing based on just a few user-supplied parameters or goals. This rapidly generated mesh is quickly passed to FlightStream.

FlightStream uses this surface mesh for an aerodynamics simulation that incorporates the nonlinear viscous effects, compressibility, and aero-propulsive effects without requiring the time-consuming generation of a volume mesh.

When: Tue 15 Feb 2022

Time: 10:00am CST (UTC-6)

Toyota Drastically Reduces Simulation Time with Automatic CFD Pre-Processing Workflow

Toyota eliminated the drudgery of geometry model preparation and repair by establishing a pre-processing workflow that combines Cadence® OmnisTM AutoSeal and Omnis Hexpress.

Omnis AutoSeal delivers powerful gap-closing capabilities that greatly streamline creating a watertight geometry model that’s ready for meshing. And that’s where Omnis Hexpress comes into play with its volume-to-surface meshing approach.

Join us to see how to vastly reduce your simulation turn-around time.

When: Wed 16 Feb 2022

Time in EMEA and APJ: 09:00 GMT / 10:00 CET / 11:00 EET and Israel / 14:30 IST / 17:00 BJT / 18:00 JST and KST

Time in North America: 09:00am PT / 12:00pm ET / 18:00 CET

This entry was posted in Applications, Events and tagged , , , . Bookmark the permalink.

Leave a Reply